Flooring Vinyl Linoleum

Flooring Vinyl Linoleum

Measure the length and width of the room and chooss the best linoleum flooring or natural linoleum flooring for your project. By multiplying these numbers together, you can find the total square feet of material you will need. When making your purchase, add 10 percent to the amount needed to account for discolored tiles and future repairs.

Prepare the subfloor. If you have existing vinyl or linoleum, your new floor can be installed directly over the top of it. If not, it's best to lay a 1/4" layer of plywood over the subfloor before you begin. The plywood should be firmly stapled or nailed in place.

Remove baseboards and trim from the perimeter of the room, as well as any floor-level receptacle plates.

Snap a chalk line at the center of each wall in the room. The point where these lines intersect is the middle of the room. It is where you will begin laying your tile. Don't use adhesive yet, as you are simply determining layout at this point.

Use a utility knife to cut any sections as necessary to fit each row. You can use another tile as a straight edge to guide you as you cut.

Peel off the paper backing of each tile, and then set it back into place according to the layout you determined. If you do not have self-adhering tiles, you can use a trowel to spread flooring adhesive to a small area at a time. As soon as you have spread the adhesive, press the tiles firmly into place.

Reinstall baseboards and trim to complete the project. After you are finished, cleaning linoleum flooring keeps your floors lasting years, make sure to use a good linoleum floor cleaner.